Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-WTEH 3-TLG PC SCHU VARIOBLOC
Service units, 3-piece with polycarbonate bowl and bowl guard
Product image
Properties
| Input pressure |
Max. 16 bar (polycarbonate bowl), Max. 20 bar (metal bowl) |
| Media temperature |
max. 50 °C |
| Ambient temperature |
Max. 50 °C (polycarbonate bowl), Max. 80 °C (metal bowl) |
| Pore size in filter element |
40 μm |
| Sealant |
NBR |
| Spring bonnet |
POM |
| Housing |
Die-cast zinc |
| Diaphragm |
NBR |
| Dropper |
PA |
| Drain valve |
Manual |
| Flow rate measurement |
At P1 = 10 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Description
Two or three-piece service units consisting of a reversible diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, combined with a centrifugal separator and a proportional lubricator. Approved series in modern industrial design, with the following key benefits: Simple handling, Convenient modular assembly thanks to innovative fasteners, Excellent flow values.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
|---|---|---|---|---|---|---|
| K- 07 25 22 86 | G 1/4 | 0.5 - 10 bar | 1500 | 144,0 | 201,0 mm | 68,0 |
| K- 07 25 22 85 | G 3/8 | 0.5 - 10 bar | 1800 | 144,0 | 201,0 mm | 68,0 |
| K- 07 25 22 84 | G 1/2 | 0.5 - 10 bar | 3400 | 210,0 | 247,0 mm | 98,0 |
| K- 07 25 22 83 | G 3/4 | 0.5 - 10 bar | 5000 | 210,0 | 247,0 mm | 98,0 |
| K- 07 25 22 82 | G 1 | 0.5 - 10 bar | 5000 | 264,0 | 247,0 mm | 98,0 |
Additional information
Service units are also available with bowl guard or metal bowl. Service units are also available in other control ranges.
Ordering information
Service units are also available with bowl guard or metal bowl. Service units are also available in other control ranges (0.5 - 6 bar and 0.5 - 16 bar) and in lockable version. Please ask for more information.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.