K-DRG RUECKSTERERBAR M MANO VA
Reversible, stainless steel pressure regulators with self-relieving design, stainless steel pressure gaugeProduct image
Properties
Input pressure |
Max. 30 bar (Control range 0.5 - 8.0 bar), Max. 50 bar (Control range 1.0 - 15.0 bar) |
Media temperature |
max. 80 °C |
Ambient temperature |
Max. 80 °C |
Sealant |
FKM |
Diaphragm |
PTFE |
Material |
stainless steel 1.4404 (AISI 316L) |
Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp ≤ 1 bar |
Description
Stainless steel regulators containing no non-ferrous metals for use in the food processing, chemical, mining, plant construction and special machinery industries as well as in the medical technology.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
---|---|---|---|---|---|---|---|
K- 07 25 02 06 | G 1/4 | 0.5 - 8.0 bar | 200 | 65,0 | 162.0 mm | 37,0 | 125,0 |
K- 07 25 02 07 | G 1/4 | 1.0 - 15.0 bar | 330 | 65,0 | 162.0 mm | 37,0 | 125,0 |
K- 07 25 02 04 | G 1/2 | 0.5 - 8.0 bar | 660 | 80,0 | 164.0 mm | 37,0 | 127,0 |
K- 07 25 02 05 | G 1/2 | 1.0 - 15.0 bar | 1800 | 80,0 | 164.0 mm | 37,0 | 127,0 |
Ordering information
NPT thread available on request
Spare parts
- K-HALTERBAUSATZ EDELSTAHL
- Holder
- K-MANO
- Pressure gauges (CrNi steel type / connection on rear)
- K-VERSCHLEI-SATZ
- Set of wearing parts
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.