Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-DRG FLUESSIGE MEDIEN O MANO VA
Stainless steel pressure regulators 1.4571
Product image
Properties
| Input pressure |
Max. 25 bar |
| Media temperature |
max. 80 °C |
| Ambient temperature |
Max. 80 °C |
| Sealant |
FKM |
| Compression spring |
Stainless steel (10 bar variant), Steel (2 and 6 bar variants) |
| Housing |
Stainless steel V4A (1.4571) |
| Internal parts |
Stainless steel V4A (1.4571) |
| Diaphragm |
FKM |
| Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp ≤ 1 bar |
Description
Diaphragm pressure regulators with non-self-relieving design. The pressure setting can be locked by pushing the knob down.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
|---|---|---|---|---|---|---|---|
| K- 07 25 02 12 | G 1/4 | 0.1 - 2 bar | 400 | 36,0 | 81.0 mm | 16,0 | 65,0 |
| K- 07 25 02 13 | G 1/4 | 0.2 - 6 bar | 400 | 36,0 | 81.0 mm | 16,0 | 65,0 |
| K- 07 25 02 14 | G 1/4 | 0.5 - 10 bar | 350 | 36,0 | 81.0 mm | 16,0 | 65,0 |
Spare parts
- K-HALTERBAUSATZ
- Holder
- K-MANO 3
- Pressure gauge
- K-VERSCHLEI-SATZ
- Set of wearing parts
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.