Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-WTEH SERIE ONE O DRS
Service units, »ONE« Series, without pressure switch
Product image
Properties
| Input pressure |
Max. 10 bar |
| Temp. range |
-10 °C to +50 °C |
| Media |
Compressed air |
| Protection IP |
IP 65 |
| Working pressure |
0.5 - 8 bar |
| Pressure switches |
Changeover contact |
| Pore size in filter element |
20 μm |
| Flow rate measurement |
At 6,3 bar and Δp = 1 bar |
Description
Multifunctional service unit with 6 or 7 functions in a single device: 3/2-way valve (manually operated), filter with automatic drain valve, air ports, pressure regulator, pressure gauge, soft start valve and optional: pressure switch. This combination of extremely good flow rates and a wide range of functions integrated in a single, compact unit saves valuable space and is unmatched by any similar product available in the market! Soft starting independently of the load and easy replacement of the filter cartridge under pressure are just two of the other outstanding features of this amazing device.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Connection | Flow rate (L/min) |
A (mm) |
B | C (mm) |
Voltage |
|---|---|---|---|---|---|---|
| K- 07 25 13 79 | G 1/4 | 2400 | 165,5 | 144.0 mm | 35,0 | 24 V DC (for valves and pressure switch) |
| K- 07 25 13 80 | G 3/8 | 3300 | 165,5 | 144.0 mm | 35,0 | 24 V DC (for valves and pressure switch) |
| K- 07 25 13 81 | G 1/2" | 4000 | 165,5 | 144.0 mm | 35,0 | 24 V DC (for valves and pressure switch) |
Ordering information
This unit can also be supplied with many other combinations of functions and port sizes. We will be pleased to make you an offer to match your individual specification on request!
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.