Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SKS HL UDK / SKS HS UDK
Plug-in coupling connector
Product image
Properties
| Connection 1 |
metric cylindrical outer thread |
| Sealing form 1 |
24° inner cone |
| Residual pressure: |
Coupling under residual pressure is possible |
| Material |
Steel |
| Surface |
electro galvanised |
Description
Plug-in couplings allow quick coupling.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Series | for external pipe Ø (mm) |
Connecting thread | Size | Operating pressure (bar) |
SF coup.* | Mineral oil temp. min. (°C) |
Mineral oil temp. max. (°C) |
|---|---|---|---|---|---|---|---|---|---|
| SKS 06 HL 3 UDK | 6 | L | 8 | M 14x1,5 | 3 | 225,0 | 4 | -25 | 125 |
| SKS 08 HL 3 UDK | 8 | L | 10 | M 16x1,5 | 3 | 225,0 | 4 | -25 | 125 |
| SKS 10 HL 3 UDK | 10 | L | 12 | M 18x1,5 | 3 | 225,0 | 4 | -25 | 125 |
| SKS 13 HL 3 UDK | 12 | L | 15 | M 22x1,5 | 3 | 225,0 | 4 | -25 | 125 |
| SKS 16 HL 3 UDK | 16 | L | 18 | M 26x1,5 | 3 | 225,0 | 4 | -25 | 125 |
| SKS 06 HS 3 UDK | 6 | S | 10 | M 18x1,5 | 3 | 225,0 | 4 | -25 | 125 |
| SKS 08 HS 3 UDK | 8 | S | 12 | M 20x1,5 | 3 | 225,0 | 4 | -25 | 125 |
| SKS 10 HS 3 UDK | 10 | S | 14 | M 22x1,5 | 3 | 225,0 | 4 | -25 | 125 |
| SKS 13 HS 3 UDK | 12 | S | 16 | M 24x1,5 | 3 | 225,0 | 4 | -25 | 125 |
DN = Nominal diameter, nominal width – SF gek. = Safety factor coupled
Accessories
- SKS ZUBS
- Dust protection coupling connector, SKS..
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.