Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
DG D
Rotary fitting, 2x 90°, ball bearing
Product image
Properties
| Connection 1 |
metric cylindrical outer thread |
| Sealing form 1 |
24° inner cone |
| Connection 2 |
metric cylindrical outer thread |
| Sealing form 2 |
24° inner cone |
| Design |
Rotary fitting |
| Construction |
Double angle 90° |
| Scope of supply |
Socket (without union nut and cutting ring) |
| Material |
Steel |
| Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | Operating pressure | Ø d1 (mm) |
Ø d2 (mm) |
G1 | L1 (mm) |
L2 (mm) |
L3 (mm) |
L4 (mm) |
L5 (mm) |
L6 (mm) |
L7 (mm) |
AF (mm) |
S1 | S3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DG D NW 08 HS | S | PN 250 | 9,5 | 12 | M 20 x 1.5 | 29,0 | 21,5 | 34,0 | 26,5 | 39,5 | 53,0 | 81,0 | 24 | 22 | 24 |
| DG D NW 13 HS | S | PN 250 | 9,5 | 16 | M 24 x 1.5 | 33,0 | 24,5 | 34,0 | 25,5 | 39,5 | 53,0 | 87,0 | 24 | 22 | 30 |
| DG D NW 16 HS | S | PN 250 | 16,0 | 20 | M 30 x 2 | 37,0 | 26,5 | 50,0 | 39,5 | 56,5 | 76,0 | 109,0 | 32 | 36 | 36 |
| DG D NW 20 HS | S | PN 250 | 16,0 | 25 | M 36 x 2 | 42,0 | 30,0 | 50,0 | 38,0 | 56,5 | 76,0 | 116,0 | 32 | 36 | 46 |
| DG D NW 25 HS | S | PN 250 | 26,0 | 30 | M 42 x 2 | 49,0 | 35,5 | 58,0 | 44,5 | 65,0 | 92,5 | 133,0 | 50 | 50 | 50 |
| DG D NW 32 HS | S | PN 250 | 26,0 | 38 | M 52 x 2 | 57,0 | 41,0 | 58,0 | 42,0 | 65,0 | 92,5 | 145,0 | 50 | 50 | 60 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure – Ø d2 = External pipe diameter
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.