ETOM
Screw-in fitting, T shapedProduct image
Properties
Connection 1 |
metric cylindrical outer thread |
Sealing form 1 |
Shape F |
Connection 2 + 3 |
metric cylindrical outer thread |
Sealing form 2 + 3 |
24° inner cone |
Design |
Adjustable direction screw-in fitting |
Construction |
T shaped |
Scope of supply |
Socket with union nut and cutting ring |
Material |
Steel |
Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
Identification | Series | Operating pressure | Ø d2 (mm) |
G1 | G2 + G3 | i (mm) |
L3 (mm) |
L4 (mm) |
L5 (mm) |
AF (mm) |
S1 | S2 | OR |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ETOM NW 04 HL | L | PN 315 | 6 | M 10 x 1 | M 12 x 1.5 | 7 | 29 | 14 | 20 | 14 | 14 | 14 | 8.1 x 1.6 |
ETOM NW 06 HL | L | PN 315 | 8 | M 12 x 1.5 | M 14 x 1.5 | 10 | 31 | 16 | 22 | 14 | 17 | 17 | 9.3 x 2.4 |
ETOM NW 08 HL | L | PN 315 | 10 | M 14 x 1.5 | M 16 x 1.5 | 10 | 32 | 17 | 25 | 19 | 19 | 19 | 11.3 x 2.4 |
ETOM NW 10 HL | L | PN 315 | 12 | M 16 x 1.5 | M 18 x 1.5 | 10 | 34 | 19 | 26 | 19 | 22 | 22 | 13.3 x 2.4 |
ETOM NW 13 HL | L | PN 315 | 15 | M 18 x 1.5 | M 22 x 1.5 | 11 | 36 | 21 | 30 | 22 | 24 | 27 | 15.3 x 2.4 |
ETOM NW 16 HL | L | PN 315 | 18 | M 22 x 1.5 | M 26 x 1.5 | 12 | 40 | 24 | 33 | 27 | 27 | 32 | 19.3 x 2.4 |
ETOM NW 20 HL 27 | L | PN 160 | 22 | M 27 x 2 | M 30 x 2 | 14 | 44 | 28 | 35 | 30 | 32 | 36 | 23.6 x 2.9 |
ETOM NW 25 HL | L | PN 160 | 28 | M 33 x 2 | M 36 x 2 | 14 | 47 | 31 | 38 | 36 | 41 | 41 | 29.5 x 3.0 |
ETOM NW 32 HL | L | PN 160 | 35 | M 42 x 2 | M 45 x 2 | 14 | 59 | 38 | 48 | 50 | 50 | 50 | 38.0 x 3.0 |
ETOM NW 40 HL | L | PN 160 | 42 | M 48 x 2 | M 52 x 2 | 16 | 61 | 38 | 49 | 50 | 55 | 60 | 44.5 x 3.0 |
ETOM NW 03 HS | L | PN 400 | 6 | M 12 x 1.5 | M 14 x 1.5 | 10 | 30 | 15 | 22 | 14 | 17 | 17 | 9.3 x 2.4 |
ETOM NW 04 HS | S | PN 400 | 8 | M 14 x 1.5 | M 16 x 1.5 | 10 | 32 | 17 | 26 | 19 | 19 | 19 | 11.3 x 2.4 |
ETOM NW 06 HS | S | PN 400 | 10 | M 16 x 1.5 | M 18 x 1.5 | 11 | 34 | 19 | 27 | 19 | 22 | 22 | 13.3 x 2.4 |
ETOM NW 08 HS | S | PN 400 | 12 | M 18 x 1.5 | M 20 x 1.5 | 12 | 38 | 22 | 31 | 22 | 24 | 24 | 15.3 x 2.4 |
ETOM NW 13 HS | S | PN 400 | 16 | M 22 x 1.5 | M 24 x 1.5 | 14 | 43 | 25 | 35 | 27 | 27 | 30 | 19.3 x 2.4 |
ETOM NW 16 HS | S | PN 400 | 20 | M 27 x 2 | M 30 x 2 | 16 | 49 | 28 | 39 | 30 | 32 | 36 | 23.6 x 2.9 |
ETOM NW 20 HS | S | PN 315 | 25 | M 33 x 2 | M 36 x 2 | 16 | 54 | 30 | 44 | 36 | 41 | 46 | 29.5 x 3.0 |
ETOM NW 25 HS | S | PN 250 | 30 | M 42 x 2 | M 42 x 2 | 17 | 62 | 36 | 51 | 50 | 50 | 50 | 38.0 x 3.0 |
ETOM NW 32 HS | S | PN 200 | 38 | M 48 x 2 | M 52 x 2 | 19 | 65 | 34 | 54 | 50 | 55 | 60 | 44.5 x 3.0 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure – Ø d2 = External pipe diameter
Product versions
This product is also available in the following designs:
- XETOM
- Screw-in fitting, T shaped, Socket (without union nut and cutting ring)
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.