EWORK
Screw-in fitting, angle 90°Product image
Properties
Connection 1 |
BSP external thread, cylindrical |
Sealing form 1 |
O-ring and spacer diaphragm ring |
Connection 2 |
metric cylindrical outer thread |
Sealing form 2 |
24° inner cone |
Design |
Adjustable direction screw-in fitting |
Construction |
Angle 90° |
Scope of supply |
Socket with union nut and cutting ring |
Material |
Steel |
Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
Identification | Series | Operating pressure | Ø d2 (mm) |
G1 | G2 | i (mm) |
L3 (mm) |
L4 (mm) |
L5 (mm) |
AF (mm) |
S1 | S2 | OR |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
EWORK 04 LL | LL | PN 250 | 4 | G 1/8" -28 | M 8 x 1 | 7,1 | 21 | 11,3 | 20 | 11 | 14 | 10 | 7.97 x 1.88 |
EWORK 06 LL | LL | PN 250 | 6 | G 1/8" -28 | M 10 x 1 | 7,1 | 21 | 11,3 | 20 | 11 | 14 | 12 | 7.97 x 1.88 |
EWORK NW 04 HL | L | PN 315 | 6 | G 1/8" -28 | M 12 x 1.5 | 7,0 | 29 | 14,0 | 19 | 14 | 14 | 14 | 7.97 x 1.88 |
EWORK NW 06 HL | L | PN 315 | 8 | G 1/4" -19 | M 14 x 1.5 | 9,0 | 31 | 16,0 | 23 | 14 | 19 | 17 | 10.77 x 2.62 |
EWORK NW 08 HL | L | PN 315 | 10 | G 1/4" -19 | M 16 x 1.5 | 9,0 | 32 | 17,0 | 25 | 19 | 19 | 19 | 10.77 x 2.62 |
EWORK NW 10 HL | L | PN 250 | 12 | G 3/8" -19 | M 18 x 1.5 | 9,0 | 34 | 19,0 | 28 | 19 | 22 | 22 | 13.94 x 2.62 |
EWORK NW 13 HL | L | PN 250 | 15 | G 1/2" -14 | M 22 x 1.5 | 13,0 | 36 | 21,0 | 30 | 22 | 27 | 27 | 17.86 x 2.62 |
EWORK NW 16 HL | L | PN 250 | 18 | G 1/2" -14 | M 26 x 1.5 | 13,0 | 40 | 24,0 | 36 | 27 | 27 | 32 | 17.86 x 2.62 |
EWORK NW 20 HL | L | PN 160 | 22 | G 3/4" -14 | M 30 x 2 | 13,0 | 44 | 28,0 | 36 | 30 | 36 | 36 | 23.47 x 2.62 |
EWORK NW 25 HL | L | PN 160 | 28 | G 1" -11 | M 36 x 2 | 15,0 | 47 | 31,0 | 44 | 36 | 41 | 41 | 29.74 x 3.53 |
EWORK NW 32 HL | L | PN 160 | 35 | G 1.1/4" -11 | M 45 x 2 | 15,0 | 59 | 38,0 | 50 | 50 | 50 | 50 | 37.69 x 3.53 |
EWORK NW 40 HL | L | PN 160 | 42 | G 1.1/2" -11 | M 52 x 2 | 15,0 | 61 | 38,0 | 52 | 50 | 55 | 60 | 44.04 x 3.53 |
EWORK NW 03 HS | S | PN 315 | 6 | G 1/4" -19 | M 14 x 1.5 | 9,0 | 30 | 15,0 | 23 | 14 | 19 | 17 | 10.77 x 2.62 |
EWORK NW 04 HS | S | PN 315 | 8 | G 1/4" -19 | M 16 x 1.5 | 9,0 | 32 | 17,0 | 27 | 19 | 19 | 19 | 10.77 x 2.62 |
EWORK NW 06 HS | S | PN 250 | 10 | G 3/8" -19 | M 18 x 1.5 | 9,0 | 34 | 18,0 | 29 | 19 | 22 | 22 | 13.94 x 2.62 |
EWORK NW 08 HS | S | PN 250 | 12 | G 3/8" -19 | M 20 x 1.5 | 9,0 | 38 | 22,0 | 29 | 22 | 22 | 24 | 13.94 x 2.62 |
EWORK NW 13 HS | S | PN 250 | 16 | G 1/2" -14 | M 24 x 1.5 | 13,0 | 43 | 25,0 | 36 | 27 | 27 | 30 | 17.86 x 2.62 |
EWORK NW 16 HS | S | PN 250 | 20 | G 3/4" -14 | M 30 x 2 | 12,0 | 49 | 28,0 | 39 | 30 | 36 | 36 | 23.47 x 2.62 |
EWORK NW 20 HS | S | PN 250 | 25 | G 1" -11 | M 36 x 2 | 14,0 | 54 | 30,0 | 44 | 36 | 41 | 46 | 29.74 x 3.53 |
EWORK NW 25 HS | S | PN 160 | 30 | G 1.1/4" -11 | M 42 x 2 | 15,0 | 62 | 36,0 | 49 | 50 | 50 | 50 | 37.69 x 3.53 |
EWORK NW 32 HS | S | PN 160 | 38 | G 1.1/2" -11 | M 52 x 2 | 15,0 | 65 | 34,0 | 55 | 50 | 55 | 60 | 44.04 x 3.53 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure – Ø d2 = External pipe diameter
Product versions
This product is also available in the following designs:
- XEWORK
- Screw-in fitting, angle 90°, Socket (without union nut and cutting ring)
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.