Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK RTR
Return flow filter compact tank installation
Product image
Properties
| Design |
with bypass valve 1.75 bar |
| Operating pressure |
max. 8 bar |
Description
Compact return flow filter for direct installation in the return pipe in the tank below the oil level.
Design (Qmax.) for medium ISO VG 46
at 50°C (30 mm2/s) at Δptot = 0.4 bar
Item
Sort upwards
Sort downwards
 Identification |
Filter area (cm2) |
Line connection | Q max. (L/min) |
A (mm) |
Weight (kg) |
|---|---|---|---|---|---|
| HK RTR 050 1CG1 P10 | 300 | G 3/8” | 10 | 78 | 0,2 |
| HK RTR 050 2 CG1 P10 | 600 | G 3/8” | 20 | 121 | 0,4 |
P10 paper filter (10 μm), nominal filtration – Qmax - max intake volumetric flow
Ordering information
Filter materials for other types of oil, viscosities or temperatures available on request
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.