Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
FI (Flansche)
Pump connection (4 hole)
Product image
Properties
| Design |
Pump connection (4 hole) |
| Construction |
straight |
| Mounting |
with metric screw set |
| Scope of supply |
with screw set and O-ring |
| Material |
Steel ST 42.3 |
| Surface |
electro galvanised |
Note
The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Item
Sort upwards
Sort downwards
 Identification |
Pressure PB (bar) |
LK (mm) |
A | A1 (mm) |
D (mm) |
G (mm) |
H (mm) |
L (mm) |
Screws | OR |
|---|---|---|---|---|---|---|---|---|---|---|
| FI 1 | 250 | 30 | G 3/8" -19 | 21,0 | 45 | 55 | 10 | 6,5 | (4 x) M 6 x 20 | 18.77 x 1.78 |
| FI 2 | 250 | 40 | G 1/2" -14 | 26,5 | 58 | 60 | 12 | 8,5 | (4 x) M 8 x 25 | 25.12 x 1.78 |
| FI 3 A | 250 | 51 | G 3/4" -14 | 33,5 | 76 | 72 | 16 | 10,5 | (4 x) M 10 x 30 | 31.42 x 2.62 |
| FI 3 B | 250 | 56 | G 3/4" -14 | 33,5 | 76 | 72 | 16 | 10,5 | (4 x) M 10 x 30 | 31.42 x 2.62 |
PN = Nominal pressure PB = Max. operating pressure
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.