HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

SFCE (6000 PSI)

SAE external thread flange
Hide product imageProduct image
SFCE (6000 PSI) data/img/product/SFCE_MEx.gif - SFCE (6000 PSI)
Hide propertiesProperties
Pressure series 6000 psi
Standard DIN 3901/3902
Construction straight
Design SAE external thread flange
Scope of supply connecting piece only
Material S355J2G3 (C22)
Surface electro galvanised
Hide informationNote

In accordance with SAE J 518 C, the specified nominal pressure is defined by the flange or based on the pipe to be welded on.
Recommended screws are listed in the columns M (metr) and M (unc).

Hide product tableItem

Sort upwards

Sort downwards

PN = Nominal pressure PB = Max. operating pressure  – Series: LL = Very light L = Light S = Heavy 

*1) = Choice of 12.0 or 12.5  – *2) = Choice of 13.5 or 14.5 

Hide product versionsProduct versions

This product is also available in the following designs:

SFCE M (3000 / 6000 PSI)
SAE external thread flange, with 2 flange halves, screw set, O-ring, nut and cutting ring
SFCE U (3000 / 6000 PSI)
SAE external thread flange, with 2 flange halves, screw set, O-ring, nut and cutting ring
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.