Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SFCE (6000 PSI)
SAE external thread flange
Product image
Properties
| Pressure series |
6000 psi |
| Standard |
DIN 3901/3902 |
| Construction |
straight |
| Design |
SAE external thread flange |
| Scope of supply |
connecting piece only |
| Material |
S355J2G3 (C22) |
| Surface |
electro galvanised |
Note
In accordance with SAE J 518 C, the specified nominal pressure is defined by the flange or based on the pipe to be welded on.
Recommended screws are listed in the columns M (metr) and M (unc).
Item
Sort upwards
Sort downwards
 Identification |
Series | Ø RAD (mm) |
PB 10.9 (bar) |
Size | A | A1 (mm) |
Ø B (mm) |
G1 (mm) |
G2 (mm) |
I (mm) |
L (mm) |
M metr. | M unc |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SFCE 6001 S16 | S | 16 | 400 | 1/2" | M24x1,5 | 31,7 | 12 | 53,2 | 63 | 8,5 | 8,5 | M 8 x 30 | 5/16" x 1.1/4" |
| SFCE 6002 S16 | S | 16 | 400 | 3/4" | M24x1,5 | 41,3 | 12 | 59,2 | 69 | 8,5 | 10,5 | M 10 x 35 | 3/8" x 1.1/2" |
| SFCE 6002 S20 | S | 20 | 400 | 3/4" | M30x2 | 41,3 | 16 | 61,2 | 72 | 10,5 | 10,5 | M 10 x 35 | 3/8" x 1.1/2" |
| SFCE 6002 S25 | S | 25 | 400 | 3/4" | M36x2 | 41,3 | 17 | 63,2 | 75 | 12,0 | 10,5 | M 10 x 35 | 3/8" x 1.1/2" |
| SFCE 6002 S30 | S | 30 | 400 | 3/4" | M42x2 | 41,3 | 18 | 64,0 | 77 | 13,5 | 10,5 | M 10 x 35 | 3/8" x 1.1/2" |
| SFCE 6003 S25 | S | 25 | 400 | 1" | M36x2 | 47,6 | 20 | 72,2 | 84 | 12,0 | *1 | M 12 x 45 | 7/16" x 1.3/4" |
| SFCE 6003 S30 | S | 30 | 400 | 1" | M42x2 | 47,6 | 24 | 74,0 | 87 | 13,5 | *1 | M 12 x 45 | 7/16" x 1.3/4" |
| SFCE 6004 S30 | S | 30 | 400 | 1.1/4" | M42x2 | 54,0 | 25 / 30 | 79,2 | 92 | 13,5 | *2 | M 14 x 50 | 1/2" x 1.3/4" |
| SFCE 6004 S38 | S | 38 | 350 | 1.1/4" | M52x2 | 54,0 | 30 | 83,2 | 98 | 16,0 | *2 | M 14 x 50 | 1/2" x 1.3/4" |
| SFCE 6005 S38 | S | 38 | 350 | 1.1/2" | M52x2 | 63,5 | 30 | 89,2 | 104 | 16,0 | 16,7 | M 16 x 55 | 1/2" x 1.3/4" |
PN = Nominal pressure PB = Max. operating pressure – Series: LL = Very light L = Light S = Heavy
*1) = Choice of 12.0 or 12.5 – *2) = Choice of 13.5 or 14.5
Product versions
This product is also available in the following designs:
- SFCE M (3000 / 6000 PSI)
- SAE external thread flange, with 2 flange halves, screw set, O-ring, nut and cutting ring
- SFCE U (3000 / 6000 PSI)
- SAE external thread flange, with 2 flange halves, screw set, O-ring, nut and cutting ring
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.