Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
GA
Wiper GA
Product image
Properties
| Design |
Wipers |
| Sliding speed max. |
0,5 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
100 °C |
| Media |
Mineral oils Water emulsions |
| Installation |
is pressed into an open groove |
| Material |
(1) Sleeve: Steel (2) Wiper: NBR 90° Shore A |
| Application |
Hydraulics |
Description
Low spatial requirement.
No penetration of dirt via the outer metal ring.
Simple solution.
Item
Sort upwards
Sort downwards
 Identification |
d (mm) |
D (mm) |
D (mm) |
L (mm) |
H (mm) |
Standard grooves |
|---|---|---|---|---|---|---|
| GA 10 16-3 | 10 | 16,0 | - | 3,0 | 4,5 | - |
| GA 10 19-3 | 10 | 18,9 | - | 2,9 | 5,0 | - |
| GA 10 20-5 | 10 | 20,0 | - | 5,0 | 8,0 | - |
| GA 12 18-3 | 12 | 18,0 | - | 3,5 | 5,0 | - |
| GA 12 20-4 | 12 | 20,0 | - | 4,0 | 6,0 | - |
| GA 12 22-5 | 12 | 22,0 | - | 5,0 | 8,0 | - |
| GA 14 20-3 | 14 | 20,0 | - | 3,0 | 4,5 | - |
| GA 14 22-3 | 14 | 22,0 | - | 3,0 | 4,0 | - |
| GA 16 22-3 | 16 | 22,0 | - | 3,0 | 4,0 | - |
| GA 16 26-5 | 16 | 26,0 | - | 5,0 | 8,0 | - |
| GA 18 28-5 | 18 | 28,0 | - | 5,0 | 7,0 | - |
| GA 18 28-7 | 18 | 28,0 | - | 7,0 | 10,0 | ISO 5597 |
| GA 20 26-3 | 20 | 26,0 | - | 3,5 | 5,0 | - |
| GA 20 28-3 | 20 | 28,0 | - | 3,5 | 5,0 | - |
| GA 20 28-5 | 20 | 28,0 | - | 5,0 | 7,0 | - |
| GA 20 30-4 | 20 | 30,0 | - | 4,0 | 6,0 | - |
| GA 20 30-5 | 20 | 30,0 | - | 5,0 | 8,0 | - |
| GA 20 30-7 | 20 | 30,0 | - | 7,0 | 10,0 | ISO 5597 |
| GA 20 35-7 | 20 | 35,0 | - | 7,0 | 10,0 | - |
| GA 22 28-5 | 22 | 28,0 | - | 5,0 | 9,0 | - |
| GA 22 30-4 | 22 | 30,0 | - | 4,0 | 7,0 | - |
| GA 22 32-5 | 22 | 32,0 | - | 5,0 | 7,0 | - |
| GA 22 32-7 | 22 | 32,0 | - | 7,0 | 10,0 | ISO 5597 |
| GA 22 35-5 | 22 | 35,0 | - | 5,0 | 8,0 | - |
| GA 25 35-5 | 25 | 35,0 | - | 5,0 | 8,0 | - |
| GA 25 35-7 | 25 | 35,0 | - | 7,0 | 10,0 | ISO 5597 |
| GA 28 38-5 | 28 | 38,0 | - | 5,0 | 8,0 | - |
| GA 28 38-7 | 28 | 38,0 | - | 7,0 | 10,0 | - |
| GA 28 40-7 | 28 | 40,0 | - | 7,0 | 10,0 | - |
| GA 30 40-5 | 30 | 40,0 | - | 5,0 | 8,0 | - |
| GA 30 40-7 | 30 | 40,0 | - | 7,0 | 10,0 | - |
| GA 30 45-5 | 30 | 45,0 | - | 5,0 | 8,0 | - |
| GA 32 40-4 | 32 | 40,0 | - | 4,0 | 7,0 | - |
| GA 32 42-5 | 32 | 42,0 | - | 5,0 | 7,0 | - |
| GA 32 42-7 | 32 | 42,0 | - | 7,0 | 10,0 | - |
| GA 32 45-4 | 32 | 45,0 | - | 4,0 | 8,0 | - |
| GA 32 45-7 | 32 | 45,0 | - | 7,0 | 10,0 | - |
| GA 33 43-5 | 33 | 43,0 | - | 5,0 | 8,0 | - |
| GA 35 45-5 | 35 | 45,0 | - | 5,0 | 8,0 | - |
| GA 35 45-7 | 35 | 45,0 | - | 7,0 | 10,0 | ISO 5597 |
| GA 35 47-7 | 35 | 47,0 | - | 7,0 | 10,0 | - |
| GA 36 45-7 | 36 | 45,0 | - | 7,0 | 10,0 | - |
| GA 36 46-5 | 36 | 46,0 | - | 5,0 | 8,0 | - |
| GA 3747 - 5 | 37 | - | 47 | 5,0 | - | - |
| GA 38 48-7 | 38 | 48,0 | - | 7,0 | 10,0 | - |
| GA 40 50-5 | 40 | 50,0 | - | 5,0 | 8,0 | - |
| GA 40 50-7 | 40 | 50,0 | - | 7,0 | 10,0 | ISO 5597 |
| GA 40 52-5 | 40 | 52,0 | - | 5,0 | 8,0 | - |
| GA 42 52-7 | 42 | 52,0 | - | 7,0 | 10,0 | - |
| GA 45 55-7 | 45 | 55,0 | - | 7,0 | 10,0 | ISO 5597 |
| GA 45 60-7 | 45 | 60,0 | - | 7,0 | 10,0 | - |
| GA 48 60-7 | 48 | 60,0 | - | 7,0 | 10,0 | - |
| GA 50 56-5 | 50 | 56,0 | - | 5,0 | 8,0 | - |
| GA 50 60-5 | 50 | 60,0 | - | 5,0 | 8,0 | - |
| GA 50 60-7 | 50 | 60,0 | - | 7,0 | 10,0 | ISO 5597 |
| GA 50 65-5 | 50 | 65,0 | - | 5,0 | 8,0 | - |
| GA 50 65-7 | 50 | 65,0 | - | 7,0 | 10,0 | - |
| GA 52 62-7 | 52 | 62,0 | - | 7,0 | 10,0 | - |
| GA 55 63-7 | 55 | 63,0 | - | 7,0 | 10,0 | - |
| GA 55 65-7 | 55 | 65,0 | - | 7,0 | 10,0 | - |
| GA 55 70-7 | 55 | 70,0 | - | 7,0 | 10,0 | - |
| GA 55 80-5 | 55 | 80,0 | - | 5,0 | 8,0 | - |
| GA 56 65-7 | 56 | 65,0 | - | 7,0 | 10,0 | - |
| GA 56 66-5 | 56 | 66,0 | - | 5,0 | 8,0 | - |
| GA 56 66-7 | 56 | 66,0 | - | 7,0 | 10,0 | ISO 5597 |
| GA 60 70-5 | 60 | 70,0 | - | 5,0 | 7,0 | - |
| GA 60 70-7 | 60 | 70,0 | - | 7,0 | 10,0 | - |
| GA 60 74-5 | 60 | 74,0 | - | 5,0 | 8,0 | - |
| GA 60 75-7 | 60 | 75,0 | - | 7,0 | 10,0 | - |
| GA 63 75-7 | 63 | 75,0 | - | 7,0 | 10,0 | - |
| GA 63 83-5 | 63 | 83,0 | - | 5,0 | 8,0 | - |
| GA 65 75-7 | 65 | 75,0 | - | 7,0 | 10,0 | - |
| GA 70 80-5 | 70 | 80,0 | - | 5,0 | 7,0 | - |
| GA 70 80-7 | 70 | 80,0 | - | 7,0 | 10,0 | ISO 5597 |
| GA 75 85-7 | 75 | 85,0 | - | 7,0 | 10,0 | - |
| GA 75 87-5 | 75 | 87,0 | - | 5,0 | 7,0 | - |
| GA 80 90-7 | 80 | 90,0 | - | 7,0 | 10,0 | ISO 5597 |
| GA 85 95-7 | 85 | 95,0 | - | 7,0 | 10,0 | - |
| GA 90 100-5 | 90 | 100,0 | - | 5,0 | 7,0 | - |
| GA 90 100-7 | 90 | 100,0 | - | 7,0 | 10,0 | ISO 5597 |
| GA 95 105-7 | 95 | 105,0 | - | 7,0 | 10,0 | - |
| GA 100 110-5 | 100 | 110,0 | - | 5,0 | 7,0 | - |
| GA 100 110-7 | 100 | 110,0 | - | 7,0 | 10,0 | - |
| GA 105 115-7 | 105 | 115,0 | - | 7,0 | 10,0 | - |
| GA 110 120-7 | 110 | 120,0 | - | 7,0 | 10,0 | - |
| GA 115 125-7 | 115 | 125,0 | - | 7,0 | 10,0 | - |
| GA 120 130-7 | 120 | 130,0 | - | 7,0 | 10,0 | - |
| GA 125 140-7 | 125 | 140,0 | - | 7,0 | 10,0 | - |
| GA 125 140-9 | 125 | 140,0 | - | 9,0 | 12,0 | ISO 5597 |
| GA 130 145-9 | 130 | 145,0 | - | 9,0 | 12,0 | - |
| GA 135 145-7 | 135 | 145,0 | - | 7,0 | 10,0 | - |
| GA 135 150-9 | 135 | 150,0 | - | 9,0 | 12,0 | - |
| GA 140 150-7 | 140 | 150,0 | - | 7,0 | 10,0 | - |
| GA 140 155-9 | 140 | 155,0 | - | 9,0 | 12,0 | ISO 5597 |
| GA 150 165-9 | 150 | 165,0 | - | 9,0 | 12,0 | - |
| GA 160 175-9 | 160 | 175,0 | - | 9,0 | 12,0 | ISO 5597 |
| GA 170 185-10 | 170 | 185,0 | - | 10,0 | 14,0 | - |
| GA 180 195-10 | 180 | 195,0 | - | 10,0 | 14,0 | - |
| GA 200 220-12 | 200 | 220,0 | - | 12,0 | 16,0 | - |
Ordering information
For special operating conditions (fluid, temperature, pressure ...) please contact us.
Alternative material possible: FPM.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.