Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
GAF (6000 PSI)
SAE reduction
Product image
Properties
| Pressure series |
6000 psi |
| Standard |
SAE J 518 C ISO 6162 |
| Construction |
straight |
| Design |
SAE reduction |
| Scope of supply |
flange only |
| Material |
S355J2G3 (ST52.3) |
| Surface |
black oiled |
Note
The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).
Item
Sort upwards
Sort downwards
 Identification |
PB 10.9 (bar) |
Size | A (mm) |
C1 (mm) |
C2 (mm) |
D (mm) |
E1 (mm) |
E2 (mm) |
F (mm) |
H (mm) |
L (mm) |
M metr. | Screws |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GAF 602-602 | 400 | 3/4" x 3/4" | 19 | 50,8 | 50,8 | 70 | 23,8 | 23,8 | 70 | 28 | 11 | M 10 | M 10 x 35 |
| GAF 603-602 | 400 | 1" x 3/4" | 19 | 57,2 | 50,8 | 80 | 27,8 | 23,8 | 70 | 30 | 13 | M 10 | M 12 x 40 |
| GAF 603-603 | 400 | 1" x 1" | 25 | 57,2 | 57,2 | 80 | 27,8 | 27,8 | 75 | 36 | 13 | M 12 | M 12 x 45 |
| GAF 604-603 | 400 | 1.1/4" x 1" | 23 | 68,7 | 57,2 | 100 | 31,8 | 27,8 | 83 | 25 | 15 | M 12 | M 14 x 40 |
| GAF 604-604 | 400 | 1.1/4" x 1.1/4" | 31 | 68,7 | 68,7 | 100 | 31,8 | 31,8 | 90 | 35 | 15 | M 14 | M 14 x 50 |
| GAF 605-604 | 400 | 1.1/2" x 1.1/4" | 32 | 79,4 | 68,7 | 113 | 36,5 | 31,8 | 95 | 48 | 17 | M 14 | M 16 x 55 |
| GAF 605-605 | 400 | 1.1/2" x 1.1/2" | 38 | 79,4 | 79,4 | 113 | 36,5 | 36,5 | 105 | 50 | 17 | M 16 | M 16 x 55 |
PN = Nominal pressure PB = Max. operating pressure
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.