Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
GMM 63 HFR
Pressure gauges with glycerine filling
Product image
Properties
| Design |
Pipe spring pressure gauge with glycerine filling |
| Mounting |
Front ring with mounting bores |
| Connection 1 |
BSP external thread, cylindrical |
| Sealing form 1 |
flat seal with pin |
| Connection |
on back, centric |
| Standard |
EN 837-1 |
| Damping |
due to glycerine filling |
| Temp. range |
medium max. +60 °C Ambient -20 °C to +60 °C |
Note
Application range at idle load: 3/4 x full scale.
Application range with alternating load: 2/3 x full scale.
Item
Sort upwards
Sort downwards
 Identification |
Nominal size Ø | Scale range | Quality class | Connection |
|---|---|---|---|---|
| GMM 63-1 HFR | 63 | 0...1 | 1,6 | G 1/4" -19 |
| GMM 63-1.6 HFR | 63 | 0...1,6 | 1,6 | G 1/4" -19 |
| GMM 63-2.5 HFR | 63 | 0...2,5 | 1,6 | G 1/4" -19 |
| GMM 63-4 HFR | 63 | 0...4 | 1,6 | G 1/4" -19 |
| GMM 63-6 HFR | 63 | 0...6 | 1,6 | G 1/4" -19 |
| GMM 63-10 HFR | 63 | 0...10 | 1,6 | G 1/4" -19 |
| GMM 63-16 HFR | 63 | 0...16 | 1,6 | G 1/4" -19 |
| GMM 63-25 HFR | 63 | 0...25 | 1,6 | G 1/4" -19 |
| GMM 63-40 HFR | 63 | 0...40 | 1,6 | G 1/4" -19 |
| GMM 63-60 HFR | 63 | 0...60 | 1,6 | G 1/4" -19 |
| GMM 63-100 HFR | 63 | 0...100 | 1,6 | G 1/4" -19 |
| GMM 63-160 HFR | 63 | 0...160 | 1,6 | G 1/4" -19 |
| GMM 63-250 HFR | 63 | 0...250 | 1,6 | G 1/4" -19 |
| GMM 63-400 HFR | 63 | 0...400 | 1,6 | G 1/4" -19 |
| GMM 63-600 HFR | 63 | 0...600 | 1,6 | G 1/4" -19 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.