Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK MAP
MAP pressure switch
Product image
Properties
| Design |
changeover contact |
| Operating pressure |
max. 630 bar |
| Connection |
4-hole Flange 31x31 mm |
| Current consumption |
max. 2 A at 250 VAC; max. 3 A at 30 VDC |
| Material |
Steel |
| Scope of supply |
complete with plug incl. set of screws |
| protection class |
IP 65 |
Description
Piston pressure switch
Repetition accuracy less than or equal to 1% of set value
Electric switching rate min. 1 million operating cycles
Switching hysteresis approx. 2.5 to 10%, depending on pressure range
Setting via scale
Universal connection possibilities by separate adapters/connection plates
Item
Sort upwards
Sort downwards
 Identification |
Pressure setting range min. (bar) |
Pressure setting range max. (bar) |
Weight (kg) |
|---|---|---|---|
| HK MAP 040 | 5 | 40 | 0,5 |
| HK MAP 080 | 4 | 80 | 0,5 |
| HK MAP 160 | 8 | 160 | 0,5 |
| HK MAP 320 | 40 | 320 | 0,5 |
| HK MAP 630 | 50 | 630 | 0,5 |
Ordering information
Please order adapters and mounting plates separately!
Accessories
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.