Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK SAM
Universal cylinders aluminium 700 bar single-acting with spring retraction
Product image
Properties
| Design |
Hardened valvehead hard chrome-plated pistons spring return |
| Operating pressure |
max. 700 bar |
| Material |
Aluminium |
| Surface |
anodised |
| Scope of supply |
with female quick coupling 3/8"-18 NPT |
Description
Universal cylinder for a wide range of applications.
Very low weight (-40% of a comparable steel cylinder)
Care must be taken that no lateral forces are transmitted to the guide rings.
Compact design
Plunger wiper seals to prevent soiling
Mounting bores for stationary applications
Not suitable for long-term applications with high repetition frequencies.
Note
Attention: Please observe separate safety precautions for working with 700 bar equipment (see technical information)!
Item
Sort upwards
Sort downwards
 Identification |
(kN) |
(t) |
Stroke (mm) |
Area (cm2) |
A (mm) |
B (mm) |
D (mm) |
F (mm) |
K (mm) |
R | S (mm) |
Volume (cc) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HK SAM 05010 | 487,0 | 50 | 100 | 71,0 | 230 | 330 | 135 | 80 | 7 | M6 | 115 | 709 | 9,5 |
| HK SAM 05015 | 487,0 | 50 | 150 | 71,0 | 280 | 430 | 135 | 80 | 7 | M6 | 115 | 1063 | 11,0 |
| HK SAM 10010 | 911,0 | 100 | 100 | 133,0 | 260 | 360 | 180 | 110 | 5 | M6 | 160 | 1326 | 19,0 |
| HK SAM 10015 | 911,0 | 100 | 150 | 133,0 | 310 | 460 | 180 | 110 | 5 | M6 | 160 | 1989 | 22,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.