HK TAP 115
Tank venting and filler filtersProduct image
Properties
Design |
Flange mounting on the tank, with filler screen with clogging indicator |
Temp. min. |
-25 °C |
Temp. max. |
100 °C |
Material |
Plastic cap Gasket: NBR Steel sieve |
Air volume |
max. 1600 l/min - for HK TAP115 1 max. 2100 l/min - for HK TAP115 2 |
Description
To vent hydraulic tanks in systems with large volumetric flows or abrupt changes of the tank volume.
Note
The given filter mesh size applies for the air filter
Item
Sort upwards
Sort downwards
Identification | Filter mesh size (μm) |
Air volume (L/min) |
A (mm) |
Mounting | L (mm) |
Bolt circle (mm) |
Ø A (mm) |
Tank bore | Weight (kg) |
---|---|---|---|---|---|---|---|---|---|
HK TAP115 1 F A03 A1B | 3 | 1600 | 91 | 6 x M5 | 108,0 | 73 | 116,00 | 51 mm | 0,46 |
HK TAP115 2 F A03 A1B | 3 | 2150 | 155 | 6 x M5 | 108,0 | 73 | 116,00 | 51 mm | 0,60 |
Accessories
- HK A115
- Filter set for filling and ventilation filter TAP
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.