Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK EH 1460
Screw-in tubular heaters
Product image
Properties
| Design |
with or without temperature controller |
| Connection |
G 1 1/2" |
| Use |
for preheating of hydraulic oil |
Description
For horizontal installation under the oil surface
Surface load 1.5 W/cm2 for hydraulic oils
Glossy galvanised steel cover
Item
Sort upwards
Sort downwards
 Identification |
Heating capacity (W) |
Immersion depth (mm) |
Protection class | Voltage | Temp. control | Weight (kg) |
|---|---|---|---|---|---|---|
| HK EH 1460 650 TA 3X4 | 1460 | 650 | IP 54 | 3 x 400 V | external | 1,9 |
| HK EH 1460 650 3X4 | 1460 | 650 | IP 65 | 3 x 400 V | without | 1,7 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.