SIN HL
Swage nipple, CELProduct image
Properties
Connection 1 |
metric cylindrical outer thread |
Sealing form 1 |
24° inner cone |
Short code |
CEL |
Standard |
DIN 3861 DIN ISO 12151-2 |
Material |
Steel |
Surface |
electro galvanised |
Note
Choose the appropriate ferrule based on the hose type.
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | Ø D (mm) |
G1 | for external pipe Ø (mm) |
---|---|---|---|---|---|---|
SIN 03 HL | 3 | 2 | 1/8" | 5,0 | M 10 x 1 | 5 |
SIN 04 HL | 4 | 3 | 3/16" | 6,0 | M 12 x 1.5 | 6 |
SIN 06 HL | 6 | 4 | 1/4" | 8,0 | M 14 x 1.5 | 8 |
SIN 08 HL | 8 | 5 | 5/16" | 10,0 | M 16 x 1.5 | 10 |
SIN 10 HL | 10 | 6 | 3/8" | 12,0 | M 18 x 1.5 | 12 |
SIN 13 HL | 12 | 8 | 1/2" | 15,0 | M 22 x 1.5 | 15 |
SIN 13 HL 16 | 12 | 8 | 1/2" | 15,0 | M 26 x 1.5 | 18 |
SIN 16 HL | 16 | 10 | 5/8" | 18,0 | M 26 x 1.5 | 18 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.