Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
DAMPF AR MG
Steam fittings AR, with clamping brass shell
Product image
Properties
| Application |
Hot water or saturated steam applications |
| Connection 1 |
BSP nut thread |
| Sealing form 1 |
flat sealing |
| Operating pressure |
up to 18 bar |
| Short code |
DKR flat |
| Standard |
DIN EN 14423 thread standard ISO 228/DIN 2999 |
| Scope of supply |
with clamping shells and seal |
| Temp. range |
saturated steam up to +210 °C hot water up to +120 °C |
| Material |
Brass Pressed brass clamping shells |
Item
Sort upwards
Sort downwards
 Identification |
DN | Size | Inches | G1 | L (mm) |
Clamping range (mm) | S1 (mm) |
|---|---|---|---|---|---|---|---|
| DAMPF 13 AR MG | 12 | 8 | 1/2" | G 1/2" -14 | 88,0 | 24 - 26 | 27 |
| DAMPF 19 AR MG | 19 | 12 | 3/4" | G 3/4" -14 | 92,0 | 32 - 34 | 32 |
| DAMPF 25 AR MG | 25 | 16 | 1" | G 1" -11 | 93,0 | 39 - 41 | 41 |
| DAMPF 32 AR MG | 31 | 20 | 1.1/4" | G 1.1/4" -11 | 97,5 | 47 - 50 | - |
| DAMPF 38 AR MG | 38 | 24 | 1.1/2" | G 1.1/2" -11 | 120,0 | 53 - 56 | 55 |
| DAMPF 50 AR MG | 51 | 32 | 2" | G 2" -11 | 131,0 | 67 - 69 | 70 |
DN = Nominal diameter, nominal width
Product versions
This product is also available in the following designs:
- DAMPF AR
- Steam fittings AR, with steel clamping shell, Steel
- DAMPF AR VA
- Steam fittings AR, with stainless steel clamping shell, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.