TRP AJ
Swage fitting, DKJProduct image
Properties
Connection 1 |
UN/UNF nut threads |
Sealing form 1 |
74° inner cone |
Short code |
DKJ |
Standard |
ISO 8434-2 |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | G1 | L1 (mm) |
AF (mm) |
S1 |
---|---|---|---|---|---|---|---|
TRP 04 AJ 06 | 5 | 3 | 3/16" | 7/16"-20 UNF | 55,0 | 14 | 17 |
TRP 06 AJ | 6 | 4 | 1/4" | 7/16"-20 UNF | 61,0 | 14 | 17 |
TRP 06 AJ 08 | 6 | 4 | 1/4" | 1/2"-20 UNF | 61,0 | 14 | 17 |
TRP 06 AJ 10 | 6 | 4 | 1/4" | 9/16"-18 UNF | 61,0 | 14 | 19 |
TRP 08 AJ 10 | 8 | 5 | 5/16" | 9/16"-18 UNF | 64,0 | 17 | 19 |
TRP 10 AJ | 10 | 6 | 3/8" | 9/16"-18 UNF | 69,0 | 19 | 19 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.