Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
TRP FS
Swage fitting, BES
Product image
_MEx.gif "TRP FS - data/img/product/TRPxxFL(FS)_MEx.gif")
Properties
| Connection 1 |
Pipe sockets |
| Sealing form 1 |
Cutting ring connection |
| Short code |
BES |
| Standard |
ISO 8434-1 |
| Scope of supply |
Swage nipple + swage ferrule |
| Material |
Steel |
| Surface |
electro galvanised |
Note
Final cutting ring assembly must be carried out in the hardened pre-assembly socket (VOM...).
Item
Sort upwards
Sort downwards
 Identification |
DN | Size | Inches | Series | D2 (mm) |
L1 (mm) |
AF (mm) |
|---|---|---|---|---|---|---|---|
| TRP 04 FS | 5 | 3 | 3/16" | S | 8,0 | 59,0 | 14 |
| TRP 06 FS | 6 | 4 | 1/4" | S | 10,0 | 67,0 | 14 |
| TRP 06 FS 04 | 6 | 4 | 1/4" | S | 8,0 | 65,0 | 14 |
| TRP 06 FS 08 | 6 | 4 | 1/4" | S | 12,0 | 68,0 | 17 |
| TRP 08 FS | 8 | 5 | 5/16" | S | 12,0 | 71,0 | 17 |
| TRP 08 FS 06 | 8 | 5 | 5/16" | S | 10,0 | 70,0 | 17 |
| TRP 10 FS | 10 | 6 | 3/8" | S | 14,0 | 79,0 | 19 |
| TRP 10 FS 06 | 10 | 6 | 3/8" | S | 10,0 | 75,0 | 19 |
| TRP 10 FS 08 | 10 | 6 | 3/8" | S | 12,0 | 77,0 | 19 |
| TRP 13 FS | 12 | 8 | 1/2" | S | 16,0 | 87,0 | 24 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.