PAY 300 HB
Swage fitting, AGRProduct image
Properties
Connection 1 |
BSP external thread, cylindrical |
Sealing form 1 |
60° inner cone |
Short code |
AGR |
Standard |
ISO 8434-6 BS 5200 |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | G1 | L1 (mm) |
S1 |
---|---|---|---|---|---|---|
PAY 306 HB | 6 | 4 | 1/4" | G 1/4" -19 | 64,0 | 17 |
PAY 308 HB 10 | 8 | 5 | 5/16" | G 3/8" -19 | 64,0 | 22 |
PAY 310 HB | 10 | 6 | 3/8" | G 3/8" -19 | 71,0 | 22 |
PAY 310 HB 13 | 10 | 6 | 3/8" | G 1/2" -14 | 76,0 | 22 |
PAY 313 HB | 12 | 8 | 1/2" | G 1/2" -14 | 79,0 | 24 |
PAY 316 HB 20 | 16 | 10 | 5/8" | G 3/4" -14 | 92,0 | 32 |
PAY 320 HB | 19 | 12 | 3/4" | G 3/4" -14 | 92,0 | 32 |
PAY 320 HB 25 | 19 | 12 | 3/4" | G 1" -11 | 100,0 | 36 |
PAY 325 HB | 25 | 16 | 1" | G 1" -11 | 100,0 | 36 |
PAY 325 HB 32 | 25 | 16 | 1" | G 1.1/4" -11 | 103,0 | 50 |
PAY 332 HB 40 | 31 | 20 | 1.1/4" | G 1.1/2" -11 | 118,0 | 55 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.