PAY 300 SF 45
Swage fitting, SFL angle 45°
Product image
![PAY 300 SF 45 PAY 300 SF 45](/data/img/product/PAY_300_SF_45.jpg)
![PAY 300 SF 45 - data/img/product/PAYxxxSF_45_MEx.gif data/img/product/PAYxxxSF_45_MEx.gif - PAY 300 SF 45](/data/img/product/PAYxxxSF_45_MEx.gif)
Properties
Connection 1 |
SAE flange connection 3000 PSI |
Sealing form 1 |
flat seal with SF O-ring |
Short code |
SFL |
Standard |
SAE J518 ISO 6162-1 |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Steel |
Surface |
electro galvanised |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN | Size | Inches | Flange size | D (mm) |
H (mm) |
L1 (mm) |
L2 (mm) |
---|---|---|---|---|---|---|---|---|
PAY 316 SF 20 45 | 16 | 10 | 5/8" | 3/4" | 38,1 | 6,7 | 113,5 | 24,0 |
PAY 325 SF 45 | 25 | 16 | 1" | 1" | 44,4 | 8,0 | 125,0 | 32,0 |
PAY 332 SF 45 | 31 | 20 | 1.1/4" | 1.1/4" | 50,8 | 8,0 | 174,0 | 37,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.