Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
TF 100
PTFE hose, smooth, 1 braiding
Product image
Properties
| Application |
Medium pressure applications with hydraulic fluids (high temperatures) and aggressive media for the chemical industry Surface technology 2-component systems |
| Design |
Smooth inliner in white PTFE |
| Braiding |
1 braiding with 1.4301 / 1.4306 |
| Inner layer |
PTFE |
| Outer layer |
none |
| Colour |
metallic |
| Temp. min. |
-70 °C |
| Temp. max. |
260 °C |
| Material |
PTFE (polytetrafluoroethylene) |
Note
Not recommended for high dynamic pressure loads.
From 120 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 120 °C / 140 °C / 160 °C / 180 °C / 200 °C / 220 °C
Factor: 1,00 / 0,80 / 0,60 / 0,40 / 0,20 / 0,00
Item
Sort upwards
Sort downwards
 Identification |
DN* | Inches | Size | Internal Ø min. (mm) |
Internal Ø max. (mm) |
External Ø min. (mm) |
External Ø max. (mm) |
Operating pressure (bar) |
Test pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TF 104 | 5 | 3/16" | 3 | 5,0 | 5,4 | 7,5 | 8,6 | 264,0 | 396 | 793 | 64 |
| TF 106 | 6 | 1/4" | 4 | 6,5 | 7,0 | 8,8 | 9,9 | 224,0 | 336 | 672 | 76 |
| TF 108 | 8 | 5/16" | 5 | 8,2 | 8,7 | 10,5 | 11,6 | 207,0 | 311 | 621 | 102 |
| TF 110 | 10 | 3/8" | 6 | 9,9 | 10,6 | 12,8 | 14,1 | 183,0 | 275 | 552 | 133 |
| TF 113 | 12 | 1/2" | 8 | 13,1 | 13,4 | 15,9 | 17,2 | 161,0 | 242 | 483 | 152 |
| TF 116 | 16 | 5/8" | 10 | 16,0 | 17,1 | 19,0 | 20,6 | 114,0 | 171 | 345 | 178 |
| TF 120 | 19 | 3/4" | 12 | 19,3 | 20,3 | 22,2 | 23,8 | 103,0 | 155 | 310 | 203 |
| TF 125 | 25 | 1" | 16 | 25,8 | 26,6 | 28,5 | 30,1 | 80,0 | 120 | 241 | 305 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.