HK CF (AG)
Cylinder base with outer threadProduct image
Properties
Material |
Steel S355J0 (Fe510C) |
Note
These cylinder bases may bulge under pressure peaks. Weld on attachments to strengthen the bases. Use thicker cylinder bases (e.g. HK CFPM) for use in conditions with major pressure fluctuations or high operating cycles.
Item
Sort upwards
Sort downwards
Identification | G | S (mm) |
Weight (kg) |
---|---|---|---|
HK CF 00 180 185 | M 185 x 2.5 | 35 | 6,85 |
HK CF 00 200 205 | M 200 x 2.5 | 48 | 11,60 |
HK CF 00 220 228 | M 228 x 2.5 | 48 | 14,50 |
HK CF 00 250 255 | M 255 x 2.5 | 48 | 18,20 |
HK CF 00 300 308 | M 308 x 3.0 | 60 | 33,00 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.