HK FAC CRNI
Chrome-plated piston rod CRNIProduct image
Properties
Design |
Piston rods - metre goods Tolerance f7 |
Material |
Steel 20MNV6CRNI |
Surface |
Nickel layer 30μm, chrome layer 20μm Surface hardness, nickel coating HV 300 Surface hardness, chrome coating HV 850 Roughness Ra ≤ 0.2μm Corrosion resistance up to 1000 hours in NSS test according to ISO 3768 / Rating 9 |
Item
Sort upwards
Sort downwards
Identification | Ø S (mm) |
Weight / meter (kg) |
---|---|---|
HK FAC 020 CRNI L000 | 20 | 2,50 |
HK FAC 025 CRNI L000 | 25 | 3,89 |
HK FAC 028 CRNI L000 | 28 | 4,72 |
HK FAC 030 CRNI L000 | 30 | 5,56 |
HK FAC 035 CRNI L000 | 35 | 7,50 |
HK FAC 036 CRNI L000 | 36 | 8,10 |
HK FAC 040 CRNI L000 | 40 | 10,00 |
HK FAC 045 CRNI L000 | 45 | 12,50 |
HK FAC 050 CRNI L000 | 50 | 15,56 |
HK FAC 060 CRNI L000 | 60 | 22,22 |
HK FAC 070 CRNI L000 | 70 | 30,28 |
HK FAC 080 CRNI L000 | 80 | 39,44 |
HK FAC 090 CRNI L000 | 90 | 50,56 |
HK FAC 100 CRNI L000 | 100 | 61,67 |
Ø S = piston rod diameter
Ordering information
Max. production length 6.00 m
Other designs available on request
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.