HK FAC HC5
Chrome-plated piston rod HC 500
Product image
![HK FAC HC5 HK FAC HC5](/data/img/product/HK_FAC_CRNIL_HK_FAc_HC_HK_FAC.jpg)
Properties
Design |
Piston rods - metre goods Tolerance f7 |
Material |
Steel 20MnV6 |
Surface |
Chrome double layer 2 x 20μm +-5μm Surface hardness HRC 66-69 (HV 850-1000) Roughness Ra ≤ 0.2μm Corrosion resistance up to 500 hours in NSS test according to ISO 3768 / Rating 9 |
Note
These materials are only ordered on request and are not available from stock.
Item
Ordering information
Max. production length 6.00 m
Other designs available on request
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.