HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

HK HFRT

Standard single-acting cylinders with fastening
Hide product imageProduct image
HK HFRT data/img/product/HK_HFRT_Zylinder_Grafik.gif - HK HFRT
Hide propertiesProperties
Design Plunger cylinders
with attachment elements
Operating pressure max. 200 bar (acc. DIN EN 982)
Test pressure max. 240 bar (acc. DIN EN 982)
Temp. range Standard version -15 °C to +80 °C
Media HLP fluids
Material Piston rod: Steel 20MnV6, Chrome 25 μm ±/- 5
Piston rod: Resistance for 120 h in the NSS test according to ISO 3768
Piston rod guide: Steel 9SMn28
Oil filler neck: Steel 9SMn28
Polished cylinder barrel: ST 52.3 DIN 2393-ISO H9
Cylinder base: FE 510-A105
Nut: Steel 8UNI EN20898/2
Gasket TPM: NBR
Piston: Steel 9SMn28
Gasket OR: NBR Fluorosil Viton
Gasket TSE-TTS-TTI/L: NBR + fabric / polyurethane
Gasket GHM-GHK: NBR / polyurethane
Hide descriptionDescription

Our hydraulic cylinders and their components are designed for standard applications in industry and agriculture. They can be used only in some circumstances for applications in construction machinery. If this is your intention, please contact our technical personnel. The cylinders conform to the technical specifications in the catalogue or are designed to customers' specifications (approval drawing).
Please observe the stipulations of EN ISO 4413 “Safety requirements for fluid power systems and their components” as well as specifications and safety requirements based on statutory regulations when selecting, installing and operating the cylinders.

Hide informationNote

Piston speed based on standard seals: Max. 25m/min - 0.42m/sec.
Piston speed to the end positions: max. 6m/min - 0.10m/sec.
For these standard cylinders, it is recommended not to weld any fastenings to the cylinder liner (e.g. cardan mountings) as this could distort it.

Hide product tableItem

Sort upwards

Sort downwards

Ø S = piston rod diameter 

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.