HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

HK 9RD 02 BG0

Hide product imageProduct image
HK 9RD 02 BG0 data/img/product/HK_9RD_Grafik_2_neu_Schaltbild.gif - HK 9RD 02 BG0
Hide propertiesProperties
Design without central phase compensation valves
internal leak oil discharge
Rotational speed range 1200 - 2700 U/min
Pressure difference max. 30 bar (between the sections)
Recommended speed 1800 - 2000 rpm
Hide descriptionDescription

This flow divider is used to supply two independent hydraulic circuits with just one pump
Division error approx. 3%
Configuration of gear flow dividers: qi = Q/z * 1000/n
qi = displacement/section [cm3]; Q = total intake volumetric flow [l/min]; z = no. of sections; n = rotating speed [rpm]

Hide informationNote

Before commissioning the system, the first running-in of the gear flow divider should be under no load.

Hide product tableItem

Sort upwards

Sort downwards

p1 = max. working pressure 

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.