Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK 92RD 04 BG2
Gear flow divider, size 2 92RD 4-way
Product image
Properties
| Design |
without central phase compensation valves internal leak oil discharge |
| Rotational speed range |
1200 - 2500 U/min |
| Pressure difference |
max. 30 bar (between the sections) |
| Recommended speed |
1800 - 2000 rpm |
Description
This flow divider is used to supply four independent hydraulic circuits with just one pump
Division error approx. 3%
This flow divider is used to supply two independent hydraulic circuits with just one pump
Configuration of gear flow dividers: qi = Q/z * 1000/n
qi = displacement/section [cm3]; Q = total intake volumetric flow [l/min]; z = no. of sections; n = rotating speed [rpm]
Note
Before commissioning the system, the first running-in of the gear flow divider should be under no load.
-
Diagrams and circuit diagrams essentially valid as schematic diagrams also for 4-way flow dividers.
Item
Sort upwards
Sort downwards
 Identification |
Intake volume per section (cc) |
p1 max. (bar) |
p2 max. (bar) |
Flow per element min. (L/min) |
Flow per element max. (L/min) |
Flow per element (L/min) |
A (mm) |
Li (mm) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| HK 92RD 04 41 | 4,00 | 210 | 260 | 4,80 | 10,00 | 7,60 | 47 | 400 | 9,5 |
| HK 92RD 04 43 | 6,00 | 210 | 260 | 7,20 | 15,00 | 10,80 | 50 | 412 | 9,9 |
| HK 92RD 04 45 | 9,00 | 210 | 260 | 10,80 | 22,50 | 15,10 | 54 | 428 | 10,3 |
| HK 92RD 04 47 | 11,00 | 210 | 260 | 13,20 | 27,50 | 19,40 | 58 | 444 | 10,8 |
| HK 92RD 04 49 | 14,00 | 200 | 230 | 16,80 | 35,00 | 25,90 | 64 | 468 | 11,5 |
p1 = max. working pressure – p2 = max. peak pressure
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.