HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

HK ADA S

Measuring adapter for pressure accumulator
Hide product imageProduct image
HK ADA S data/img/product/HK_ADA_S_grafik.jpg - HK ADA S
Hide propertiesProperties
Connection Lateral measurement connection G1/4"
Hide descriptionDescription

These adapters allow pressure sensors to be connected for continuously monitoring the gas pressure in pressure accumulators. In order to fit the adapter, the gas valve (or the sealing screw) is removed from the gas connection and the adapter screwed on. The gas valve (or the sealing screw) is mounted at the top in the adapter. Depending on requirements, either a pressure sensor or a pressure switch can now be fitted on the side G 14/“ connection of the adapter. If the connection is not used, it must be sealed with a blind plug.

Hide informationNote


Hide product tableItem

Sort upwards

Sort downwards

Hide item accessoriesAccessory for following products
HK BLAK
Bladder accumulator
HK OLM A
Diaphragm accumulator, connection A
HK OLM C
Diaphragm accumulator, connection C
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.