HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

HK SAB M

Safety and isolation block with manual relief
Hide product imageProduct image
HK SAB M data/img/product/HK_SAB_M_Kopfgrafik_N.jpg - HK SAB M
Hide propertiesProperties
Design Safety valve
Operating pressure max. 350 bar
Additional feature with TÜV certification
Material Gasket: NBR
Connection for accumulator M33x2
Hide descriptionDescription

The safety and isolation block is used to protect, shut off and discharge hydraulic accumulators. It is designed and manufactured in accordance with Directive 2014/68/EU (PED), Article 3 Para. 3 and takes into account the European safety regulations for the operation of hydraulic accumulators. Discharging the accumulator is done manually at a ball valve or a relief valve.
Viscosity of the fluids must lie within the following limits: min. 10 mm2/s, max. 380 mm2/s

Hide informationNote

Safety valve is preset; observe the maximum pressure when allocating to the corresponding accumulator!

Hide product tableItem

Sort upwards

Sort downwards

Hide product accessoriesAccessories
HK AS
Accumulator adapters for safety and isolation block
HK MSM
Lock nuts for diaphragm accumulator C
Hide item accessoriesAccessory for following products
HK OLM A
Diaphragm accumulator, connection A
HK OLM C
Diaphragm accumulator, connection C
HK BLAK
Bladder accumulator
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.