Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK PAM 015 T
Manual pump for tank installation with directional control valve
Product image
Properties
| Scope of supply |
incl. seal and screw set |
| Material |
Housing: cast iron, inner parts steel |
Note
The pressure relief valves must be set according to the application.
Item
Sort upwards
Sort downwards
 Identification |
Thread | Vdh (ccm) (cc) |
Design | p max. (bar) |
Pressure (30)* (bar) |
Weight (kg) |
|---|---|---|---|---|---|---|
| HK PAM 015 1200 | 2 x 3/8" AG | 12 | with 4/3-way valve | 380 | 160 | 2,85 |
| HK PAM 015 1202 | 2 x 3/8" AG | 12 | with pressure relief valve and 4/3-way valve | 380 | 160 | 3,00 |
| HK PAM 015 2500 | 2 x 3/8" AG | 25 | with 4/3-way valve | 350 | 100 | 2,95 |
| HK PAM 015 2502 | 2 x 3/8" AG | 25 | with pressure relief valve and 4/3-way valve | 350 | 100 | 3,10 |
| HK PAM 015 4500 | 2 x 3/8" AG | 45 | with 4/3-way valve | 280 | 80 | 3,15 |
| HK PAM 015 4502 | 2 x 3/8" AG | 45 | with pressure relief valve and 4/3-way valve | 280 | 80 | 3,30 |
Vdh = conveying volume per double stroke – Pressure (30)= pressure with hand force 30 daN with standard lever
Ordering information
Caution! Remember to order the hand lever HKPAM0290000!
Accessories
- HK PAM Hebel
- Lever for PAM manual pump
- HK PM0 022
- Tank for PAM manual pump
- HK PAM Faltenbalg
- Bellows for PAM manual pump
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.