Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK FS
Flow divider / combiner FS
Product image
Properties
| Design |
pressure-compensated |
| Operating pressure |
max. 350 bar |
Description
Δp at max nominal flow = 20 bar
Same accuracy when dividing or combining the oil flows
Division accuracy in % of total oil flow at connection 3:
HKFSBS at 12l/min = 50% ± 2.5%;
HKFSBS at 2.5l/min = 50% ± 4.5%
HKFSCS at 30l/min = 50% ± 2.5%;
HKFSCS at 6l/min = 50% ± 4.5%
At Q < Qmin the division accuracy is indeterminate
Item
Sort upwards
Sort downwards
 Identification |
Volumetric flow min. (L/min) |
Volumetric flow max. (L/min) |
A (mm) |
B (mm) |
Screw-in housing | Screw-in thread | AF (mm) |
Tightening torque (N-m) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| HK FS BS XAN | 2,5 | 12,0 | 19,0 | 85,0 | HK MMU / HK MMUS / HK MMV / HK MMVS / HK MBJ M | T-31A | 22 | 50,0 | 0,5 |
| HK FS CS XAN | 6,0 | 30,0 | 19,0 | 85,0 | HK MMU / HK MMUS / HK MMV / HK MMVS / HK MBJ M | T-31A | 22 | 50,0 | 0,5 |
Accessories
- HK GEH MM
- Valve housing for cartridge valve T-31A
- HK GEH MBJ
- Housing sandwich plate for cartridge valve T-31A
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.