HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

HK BM C0

Pressure transmission for hand-operated directional control valve BM
Hide product imageProduct image
HK BM C0 data/img/product/HK_BM_CO_Grafik.gif - HK BM C0
Hide propertiesProperties
Scope of supply with O-ring
Material Steel
Hide descriptionDescription

The pressure transmission is suitable for linking monobloc valves type HK BM together. In this situation, the pressure transmission on valve 1 is screwed into the oil port T2. The return flow to the tank on valve 1 must be connected to the top port T1. If valve 1 is not actuated, another function can be controlled at full pressure and volume flow using valve 2. If valve 1 is actuated, then no pressure is available at valve 2.

Hide product tableItem

Sort upwards

Sort downwards

Hide item accessoriesAccessory for following products
HK BM40
Hand-operated directional control valve BM 40
HK BM70
Hand-operated directional control valve BM 70
HK BM150
Hand-operated directional control valve BM 150
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.