Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK DLHZO TE
Proportional solenoid-operated directional control valve size 6
Product image
Properties
| Design |
4/3-way valve direct-controlled for applications in closed control loop |
| Scope of supply |
without plug with integrated electronics |
| Operating pressure |
P, A, B: max. 350bar / T: max. 160bar |
| Volumetric flow |
max. 70 l/min (note characteristic curves) |
| Connection |
ISO/Cetop 03 size 6 |
Description
with hardened sleeve for max. overlapping accuracy
Completely encapsulated solenoid coils
Response time < 10 ms
Hysteresis < 0,1%
Pilot signal 0-10 VDC
Note
(*) These 4/3-way valves are switched by only one coil. The off-center Fail-Safe position of the piston is reached by spring return after switching off the voltage.
Item
Sort upwards
Sort downwards
 Identification |
Circuit diagram | Type | Overlap | Control | Design | Piston type | Weight (kg) |
|---|---|---|---|---|---|---|---|
| HK DLHZO TE 040 L71 |  |
4/3 | Zero | linear | Spring return to Fail-Safe Position (*) | L7 [A/B/P/T]-[PB/AT]-[ABPT]-[PA/BT] | 2,8 |
| HK DLHZO TE 040 L73 |  |
4/3 | Zero | linear | Spring return to Fail-Safe Position (*) | L7 [ABT/P]-[PB/AT]-[ABPT]-[PA/BT] | 2,8 |
Piston type example: [A/B/PT] = [A blocked / B blocked / P+T connected]
Ordering information
Other designs available on request
Accessories
- HK M HK DH
- Screw set for NG 6 valves type HK DH / DG4V3
- HK SPZ
- Electrical connector for proportional valves
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.