Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK V7 467
4/3-way changeover valve
Product image
Properties
| Design |
Type A - mid-position open Type C - mid-position closed |
| Material |
Housing: cast iron, inner parts steel |
Note
Rotary slide valves can be pressurised from all sides and are designed to have less internal leakage
Item
Sort upwards
Sort downwards
 Identification |
Circuit diagram | Pressure max. (bar) |
Connections | Q max. (L/min) |
a (mm) |
b (mm) |
c (mm) |
e (mm) |
g (mm) |
i (mm) |
L (mm) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HK V7 467 A06 |  |
250 | 3/8" | 35 | 54 | 77 | 8,5 | 38,5 | 71 | 38,5 | 110 | 1,28 |
| HK V7 467 A08 | |
250 | 1/2" | 50 | 68 | 90 | 8,5 | 45,0 | 80 | 45,0 | 120 | 1,90 |
| HK V7 467 A12 | |
220 | 3/4" | 90 | 74 | 95 | 8,5 | 47,5 | 90 | 47,5 | 125 | 2,60 |
| HK V7 467 C06 |  |
250 | 3/8" | 35 | 54 | 77 | 8,5 | 38,5 | 71 | 38,5 | 110 | 1,28 |
| HK V7 467 C08 | |
250 | 1/2" | 50 | 68 | 90 | 8,5 | 45,0 | 80 | 45,0 | 120 | 1,90 |
| HK V7 467 C12 | |
220 | 3/4" | 90 | 74 | 95 | 8,5 | 47,5 | 90 | 47,5 | 125 | 2,60 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.