K 47-16
Connecting fitting, angle 90°Product image
Properties
Connection 1 |
metric cylindrical outer thread |
Sealing form 1 |
Butt construction |
Connection 2 |
Hose connection |
Design |
for bulkhead mounting |
Construction |
Angle 90° |
Scope of supply |
with union nut, cutting ring, pressure ring, sealing ring, counter nut and hose fitting |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | Ø d1 (mm) |
for hose ID (mm) |
L1 (mm) |
L2 (mm) |
L3 (mm) |
AF (mm) |
S1 | S2 | S3 |
---|---|---|---|---|---|---|---|---|---|
K 47-16 | 15 | 13 | 90 | 76 | 56 | 19 | 27 | 27 | 27 |
AF = Width across flats
Product versions
This product is also available in the following designs:
- K 430-17 - K 430-86
- Screw-in socket for bulkhead fitting, Steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.