KAMMRING M
Diaphragm ring, metric
Product image
![KAMMRING M KAMMRING M](/data/img/product/KAMMRING_M.jpg)
![KAMMRING M - data/img/product/SF_O-RING_MEx.gif data/img/product/SF_O-RING_MEx.gif - KAMMRING M](/data/img/product/SF_O-RING_MEx.gif)
Properties
Material |
Steel |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Ø d1 (mm) |
Ø d2 (mm) |
for thread | S (mm) |
---|---|---|---|---|
KAMMRING M 12 | 14,10 | 17,50 | M 12 | 1,40 |
KAMMRING M 14 | 16,10 | 19,50 | M 14 | 1,40 |
KAMMRING M 16 | 18,10 | 22,50 | M 16 | 1,40 |
KAMMRING M 18 | 20,10 | 24,50 | M 18 | 1,40 |
KAMMRING M 20 | 22,10 | 26,50 | M 20 | 1,40 |
KAMMRING M 22 | 24,10 | 27,50 | M 22 | 1,40 |
KAMMRING M 2627 | 29,70 | 32,50 | M 26 / M 27 | 2,50 |
KAMMRING M 30 | 32,00 | 36,75 | M 30 | 1,95 |
KAMMRING M 33 | 35,80 | 44,50 | M 33 | 2,50 |
KAMMRING M42-11/4 | 44,90 | 55,50 | M 42 | 2,50 |
KAMMRING M48-11/2 | 50,90 | 62,00 | M 48 | 2,50 |
Accessory for following products
![](/images/up.gif)
- GE HMOK AJ
- Screw-in sockets
- GE HMOK HB
- Screw-in sockets
- GE HMOK HJ
- Screw-in sockets
- GE HMOK HJOF
- Screw-in sockets
- GE HMOK L HJ
- Screw-in socket, long
- L HMOK HB
- Screw-in socket, L shaped
- L HMOK HJ
- Screw-in socket, L shaped
- L HMOK HJOF
- Screw-in socket, L shaped
- T HMOK HB
- Screw-in socket, T shaped
- T HMOK HJ
- Screw-in socket, T shaped
- T HMOK HJOF
- Screw-in socket, T shaped
- W45 HMOK HB
- Screw-in socket, angle 45°
- W45 HMOK HJ
- Screw-in socket, angle 45°
- W45 HMOK HJOF
- Screw-in socket, angle 45°
- W90 HMOK HB
- Screw-in socket, angle 90°
- W90 HMOK HJ
- Screw-in socket, angle 90°
- W90 HMOK HJOF
- Screw-in socket, angle 90°
- W90 HMOK L HJ
- Screw-in socket, long, angle 90°
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.