Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-BKR ELK 230 VAC MS
Brass ball valves with electric actuator 230 VAC, 50 Hz
Product image
Properties
| Operating pressure |
DN 15 - DN 32: max. 40 bar; DN 40 - DN 50: max. 25 bar |
| Operating temperature |
-20 °C to +70 °C |
| Duty cycle |
ED 30 % |
| Relative humidity |
30 % to 95 % |
| Valve positions |
Manually operated |
| protection class |
IP 67 |
| Actuating time |
13 sec. = 230 VAC, 50 Hz 15 sec. = 24 VDC |
| Ambient temperature |
-30 °C to +70 °C |
| Mounting flange |
ISO 5211 |
| Housing |
Aluminium, powder-coated |
| Ball valve |
brass nickel plated |
| Ball, operating shaft |
Chrome-plated brass |
| Ball seals |
PTFE, glass fibre-reinforced |
| Selector shaft seal |
FKM |
Description
Voltage range 230 VAC, 50 Hz or 24 VDC. 2-way cock, full bore, for neutral gases and liquids.
Reversible electric rotary actuator.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
DN | Thread | A (mm) |
B (mm) |
D (mm) |
L (mm) |
AF (mm) |
|---|---|---|---|---|---|---|---|
| K- 07 30 20 64 | 15 | Rp 1/2 | 152,0 | 189,0 | 17,0 | 75,0 | 26 |
| K- 07 30 20 65 | 20 | Rp 3/4 | 152,0 | 192,0 | 20,0 | 80,0 | 32 |
| K- 07 30 20 66 | 25 | Rp 1 | 152,0 | 195,0 | 25,0 | 90,0 | 41 |
| K- 07 30 20 67 | 32 | Rp 1 1/4 | 152,0 | 206,0 | 30,0 | 110,0 | 50 |
| K- 07 30 20 68 | 40 | Rp 1 1/2 | 152,0 | 213,0 | 36,0 | 120,0 | 55 |
| K- 07 30 20 69 | 50 | Rp 2 | 152,0 | 224,0 | 45,0 | 140,0 | 70 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.