Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-BKR GELB STAHLHEBEL IG IG
Ball valves with yellow steel lever, lighweight type, female/female thread
Product image
Properties
| Application |
Compressed air, water, non-toxic and non-corrosive gases, heating systems, agriculture |
| Operating pressure |
Max. 40 bar |
| Operating temperature |
-15 °C to +90 °C |
| Thread description |
G thread acc. DIN EN ISO 228-1 |
| Housing |
Nickel-plated brass |
| Lever |
Steel, with plastic coating |
| Ball |
Chrome-plated brass |
| Ball seals |
PTFE |
| Stem seal |
HNBR / EPDM / PTFE. 2 O-Rings (HNBR / EPDM) 1 gasket (PTFE) additional PTFE-gasket |
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
DN | Thread | A (mm) |
B (mm) |
L (mm) |
|---|---|---|---|---|---|
| K- 07 30 00 81 | 8 | G 1/4 | 85,0 | 42,0 | 39,0 |
| K- 07 30 00 85 | 10 | G 3/8 | 85,0 | 42,0 | 43,0 |
| K- 07 30 00 89 | 15 | G 1/2 | 85,0 | 46,0 | 50,0 |
| K- 07 30 00 93 | 20 | G 3/4 | 105,0 | 53,0 | 58,0 |
| K- 07 30 00 97 | 25 | G 1 | 105,0 | 57,0 | 69,0 |
| K- 07 30 01 01 | 32 | G 1 1/4 | 130,0 | 70,0 | 81,0 |
| K- 07 30 01 05 | 40 | G 1 1/2 | 130,0 | 76,0 | 93,0 |
| K- 07 30 01 09 | 50 | G 2 | 165,0 | 92,0 | 110,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.