Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-DRGREDV
Pressure reducing valves
Product image
Properties
| Input pressure |
Max. 15 bar |
| Connection |
G 1/4 internal / external |
| Material |
Brass |
Description
Industry, trade and repair shops often require working pressures of 15 bar or less. These pressure reducing valves, which are screwed directly onto the tool, enable the actually necessary working pressure to be set.
Benefits: Significantly reduced risk of accidents, Longer tool life with fewer malfunctions, Lower noise levels at the workplace.
Note
Dependent on the input pressure P1, the initial pressure P2 can vary between -20% to +20%
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Set pressure | max. flow rate (L/min) |
A (mm) |
B | Ø C (mm) |
AF (mm) |
|---|---|---|---|---|---|---|
| K- 07 25 19 31 | 2,0 | 300 | 34,0 | 9.0 mm | 17,0 | 17 |
| K- 07 25 02 00 | 3,0 | 360 | 34,0 | 9.0 mm | 17,0 | 17 |
| K- 07 25 02 01 | 4,0 | 380 | 34,0 | 9.0 mm | 17,0 | 17 |
| K- 07 25 02 02 | 5,0 | 390 | 34,0 | 9.0 mm | 17,0 | 17 |
| K- 07 25 02 03 | 6,0 | 405 | 34,0 | 9.0 mm | 17,0 | 17 |
| K- 07 25 19 32 | 7,0 | 415 | 34,0 | 9.0 mm | 17,0 | 17 |
| K- 07 25 19 33 | 8,0 | 420 | 34,0 | 9.0 mm | 17,0 | 17 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.