K-DRS ELK GERAETESTECKER VAKUUM
Pressure switches, connection with plug connector, type A acc. to DIN 43650Product image
Properties
Application |
Pneumatic applications |
Switching frequency |
200/min. |
Switching voltage |
max. 250 V AC / 28 V DC |
Adjustment range |
-0.85 / +1 bar |
Protection IP |
IP 65 (DIN 43650), IP 67 (M 12 x 1) |
Temp. range |
-10 °C to +80 °C |
Setting cap |
Aluminium, powder-coated |
Housing |
Special die-cast material |
Diaphragm, seal |
Perbunan |
Description
For converting pneumatic to electrical signals. Designed for use in rough vacuum applications (technical vacuum). Universal switch type, suitable as NC, NO or changeover contact. These devices are free from paint-wetting impairment substances (PWIS).
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Connection | A (mm) |
B (mm) |
---|---|---|---|
K- 07 30 28 51 | Flange | 48,0 | 28,0 |
K- 07 30 28 53 | G 1/4 | 48,0 | 28,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.