Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-DRS MDR 5 O ENTLASTU VENT
»MDR 5« pressure switches, without unloading valve / on/off switch / motor protection circuit, with flange 1/4
Product image
Properties
| Media temperature |
-5 °C to +80 °C |
| max. shut-off pressure |
16 bar |
| Switching capacity |
5,5 kW |
| Contact type |
NC (3-pole) |
| max. operating cycles |
120 (electrical), 600 (mechanical) |
| Protection IP |
IP 54 |
Description
Three-phase version
Note
G thread acc. to DIN EN ISO 228-1, with ISO flange plate (acc. to ISO 5211)
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Pneumatic connection | Adjustment range |
|---|---|---|
| K- 07 30 24 24 | G 1/2 | 2,0 - 11,0 bar |
| K- 07 30 24 26 | G 1/2 | 2,5 - 16,0 bar |
Additional information
Important: A thermal, 3-pole overcurrent relay must be ordered together with these switches. Without this relay, the on/off mechanism does not work.
Ordering information
For use on devices that have to be vented whenever they are turned off, either because of safety regulations or for technical reasons. The pneumatic devices are disconnected from the system and simultaneously vented each time they are shut off.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.