Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-FI MIKRO METALLBEHAELTER MULTIFIX
Micro-filters with metal bowl
Product image
Properties
| Input pressure |
Max. 16 bar |
| Media temperature |
max. 60 °C |
| Ambient temperature |
Max. 60 °C |
| Filter rating |
0,01 μm |
| Efficiency |
99.999 % |
| Sealant |
NBR |
| Filter insert |
Borosilicate-POM |
| Housing |
Die-cast zinc |
| Drain valve |
Semi-automatic |
| Flow rate measurement |
FM at P1 = 6 bar and Δp = 0.09 bar |
Description
Micro-filters for compliance with strict compressed air purity requirements. Suitable for all applications where standard filters do not afford the desired efficiency.
Note
* = Dimensions with adapter plate!
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
DN | Size |
|---|---|---|---|---|---|---|---|---|
| K- 07 25 10 59 | G 1/4 | 280 | 47,8 | 152.5 mm | 27,0 | 125,5 | 6 | 1 |
| K- 07 25 10 62 | G 1/2 | 720 | 68,8 | 182.7 mm (187.7 mm)* | 72,0 | 149,2 | 15 | 2 |
Additional information
on Art. K-07250721: Max. inlet pressure 300 bar. Other cylinder pressure regulators available on request.
Spare parts
- K-HALTERBAUSATZ MULTIFIX
- Holder
- K-KOPPELPAKET MEHR
- Coupling packet
- K-KOPPELPAKET SCHMA
- Coupling packet
- K-AUTOMAT ABLASSVENTIL
- Automatic drain valve
- K-PC-BEHAELTER FILTER MULTIFIX
- Polycarbonate tank filter
- K-METALLBEHAELTER OELER MULTIFIX
- Metal tank oiler
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.