K-FI REGL PC-BEHAELTER S MAN VARIOB
Filter regulators with polycarbonate bowl, bowl guard and pressure gaugeProduct image
Properties
Input pressure |
Max. 16 bar (polycarbonate bowl), Max. 20 bar (metal bowl) |
Media temperature |
max. 50 °C |
Ambient temperature |
Max. 50 °C (polycarbonate bowl), Max. 80 °C (metal bowl) |
Pore size in filter element |
40 μm |
Sealant |
NBR |
Spring bonnet |
POM |
Housing |
Die-cast zinc |
Diaphragm |
NBR |
Drain valve |
Manual |
Flow rate measurement |
At P1 = 10 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Description
Reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design, combined with a centrifugal separator. The pressure setting can be locked by pushing the knob down. Approved series in modern industrial design, with the following key benefits: Simple handling, Convenient modular assembly thanks to innovative fasteners, Excellent flow values.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
---|---|---|---|---|---|---|
K- 07 25 23 01 | G 1/4 | 0.5 - 10 bar | 2000 | 48,0 | 203,0 mm | 68,0 |
K- 07 25 23 00 | G 3/8 | 0.5 - 10 bar | 3000 | 48,0 | 203,0 mm | 68,0 |
K- 07 25 22 99 | G 1/2 | 0.5 - 10 bar | 5500 | 70,0 | 273,0 mm | 98,0 |
K- 07 25 22 98 | G 3/4 | 0.5 - 10 bar | 6500 | 70,0 | 273,0 mm | 98,0 |
K- 07 25 22 97 | G 1 | 0.5 - 10 bar | 6500 | 124,0 | 273,0 mm | 98,0 |
Additional information
Filter regulators are also available with bowl guard or metal bowl. Filter regulators are also available in lockable version. Please ask for more information.
Ordering information
Filter regulators are also available with bowl guard or metal bowl. Filter regulators are also available in lockable version. Please ask for more information.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.