Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-INLINE-DRG AG IG O SEKUNDAERENTLU
Inline pressure regulators, non-self-relieving
Product image
Properties
| Operating pressure |
max. 18 bar |
| Temp. range |
0 °C to +60 °C |
| pressure tolerance |
± 0.3 bar at 10 l/min |
| Housing |
Zinc |
| Other parts |
Brass, NBR, stainless steel |
Description
This single-acting diaphragm regulator can be installed in any pneumatic system. Since the pressure is preset in the factory and cannot be altered, the product is also tamper-proof. We recommend mounting the regulator directly on the tool to make sure the correct pressure is applied. In this case, the tool is never stressed by the higher pressure of the supply system and is protected against pressure fluctuations in hoses, pipes, etc. Energy efficiency and economic efficiency can be achieved by using an inline pressure regulator.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Working pressure (preset) | A (mm) |
B | AF (mm) |
|---|---|---|---|---|---|
| K- 07 25 02 75 | G 1/4 | 1 bar | 34,0 | 52.0 mm | 17 |
| K- 07 25 02 76 | G 1/4 | 2 bar | 34,0 | 52.0 mm | 17 |
| K- 07 25 02 77 | G 1/4 | 3 bar | 34,0 | 52.0 mm | 17 |
| K- 07 25 02 78 | G 1/4 | 4 bar | 34,0 | 52.0 mm | 17 |
| K- 07 25 02 79 | G 1/4 | 5 bar | 34,0 | 52.0 mm | 17 |
| K- 07 25 02 80 | G 1/4 | 6 bar | 34,0 | 52.0 mm | 17 |
| K- 07 25 02 81 | G 1/4 | 6,5 bar | 34,0 | 52.0 mm | 17 |
| K- 07 25 02 82 | G 1/4 | 7 bar | 34,0 | 52.0 mm | 17 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.