Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-INLINE-DRG IG M SEKUNDAERENTLUEFT
Inline pressure regulators, 2 x female thread, self-relieving
Product image
Properties
| Operating pressure |
Max. 25 bar |
| Temp. range |
0 °C to +80 °C |
| Housing |
Aluminium |
| Other parts |
Stainless steel, nitrile rubber, brass |
Description
The majority of pneumatic tools are connected directly to the compressed air supply by means of a quick disconnect coupling, in other words they tend to be supplied with a higher pressure than is actually required. Which increases consumption and leads to tool overload. Added safety is provided by the automatic self-relieving function. If the tool is disconnected from the hose, it continues to work for a short period, even though it has been switched off, owing to the residual pressure that is present on the tool side.
Inadvertent operation of the tool can thus lead to serious injuries to the user (tackers or nail drivers can fire up to another ten shots).
This effect can be prevented by using the inline pressure regulators, which have a preset pressure determined by the application, thereby achieving energy efficiency and economy.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Working pressure (preset) | flow rate | A (mm) |
AF (mm) |
|---|---|---|---|---|---|
| K- 07 25 02 83 | G 1/4 | 2 bar | 600 - 800 l/min | 56,6 | 16 |
| K- 07 25 02 84 | G 1/4 | 3 bar | 600 - 800 l/min | 56,6 | 16 |
| K- 07 25 02 85 | G 1/4 | 4 bar | 600 - 800 l/min | 56,6 | 16 |
| K- 07 25 02 86 | G 1/4 | 5 bar | 600 - 800 l/min | 56,6 | 16 |
| K- 07 25 02 87 | G 1/4 | 6 bar | 600 - 800 l/min | 56,6 | 16 |
| K- 07 25 02 88 | G 1/4 | 8 bar | 600 - 800 l/min | 56,6 | 16 |
| K- 07 25 02 89 | G 3/8 | 2 bar | 2000 l/min | 63,0 | 22 |
| K- 07 25 02 90 | G 3/8 | 4 bar | 2000 l/min | 63,0 | 22 |
| K- 07 25 02 91 | G 3/8 | 6 bar | 2000 l/min | 63,0 | 22 |
| K- 07 25 02 92 | G 3/8 | 8 bar | 2000 l/min | 63,0 | 22 |
| K- 07 25 02 93 | G 1/2 | 2 bar | 3000 l/min | 67,5 | 27 |
| K- 07 25 02 94 | G 1/2 | 4 bar | 3000 l/min | 67,5 | 27 |
| K- 07 25 02 95 | G 1/2 | 6 bar | 3000 l/min | 67,5 | 27 |
| K- 07 25 02 96 | G 1/2 | 8 bar | 3000 l/min | 67,5 | 27 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.